DTC P0127: Intake Air Temperature (IAT) Too High

WARNING: This page does not describe the selected car, but rather 32 other vehicles, including the 2011 Mercury Milan, 2011 Mercury Mariner, 2011 Mercury Grand Marquis, 2011 Lincoln Town Car, and 2011 Lincoln Navigator L. However, it is still accessible from the selected car via links, so may be relevant.

P0127 - INTAKE AIR TEMPERATURE (IAT) TOO HIGH

Description:	Indicates the intake air temperature 2 (IAT2) sensor has detected a concern in the charge air cooler (CAC) system.
Possible Causes:	Blockage of heat exchangers Low fluid level Fluid leakage CAC pump or relay failure Crossed CAC coolant lines
Diagnostic Aids:	Monitor the IAT2 PID. A typical IAT2 temperature should be greater than the IAT temperature.
Application	Key On Engine Off	Key On Engine Running	Continuous Memory
All	GO to PINPOINT TEST DU .