DTC P0096: Intake Air Temperature Sensor 2 Circuit Range/Performance (Bank 1)
WARNING: This page does not describe the selected car, but rather 32 other vehicles, including the 2011 Mercury Milan, 2011 Mercury Mariner, 2011 Mercury Grand Marquis, 2011 Lincoln Town Car, and 2011 Lincoln Navigator L. However, it is still accessible from the selected car via links, so may be relevant.
P0096 - INTAKE AIR TEMPERATURE SENSOR 2 CIRCUIT RANGE/PERFORMANCE (BANK 1)
| Description: | The powertrain control module (PCM) continuously monitors this sensor for concerns. This DTC sets when the intake air temperature 2 (IAT2) PID does not correlate with the charge air cooler temperature (CAC_T) or the intake air temperature (IAT) PIDs at ignition ON. It will also set if the IAT2 PID exceeds the maximum calibrated temperature threshold while driving. | ||
| Possible Causes: |
|
||
| Diagnostic Aids: | The MAP/IAT2 sensor is located on top of the intake manifold. | ||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | GO to PINPOINT TEST EA . | ||