Glow Plug: Installation

WARNING: This page is about a different car, the 2005 Ford Pickup, 2005 Ford F550 Super Duty, 2005 Ford F450 Super Duty, and 2005 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.

Both sides

Install the glow plug.

Fig 1: Installing Glow Plug
Courtesy of FORD MOTOR CO.
Clean and apply clean engine oil to the O-ring seals.

Fig 2: Locating O-Ring Seal
Courtesy of FORD MOTOR CO.
Using the special tool, install the glow plug harness.

Fig 3: View Of Glow Plug Harness And Special Tool
Courtesy of FORD MOTOR CO.

RH side

Install the RH fender splash shield. For additional information, refer to FRONT END BODY PANELS .