LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Taurus LX, 3.0 2, AX4N >> Repair and Diagnosis >> External Pages >> Different car >> Section 1759 (Anti-Theft - Passive Anti-Theft System (Pats) (Hybrid)) >> Removal And Installation >> Passive Anti-Theft System (PATS) Transceiver >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2011 Mercury Milan, 2011 Lincoln MKZ, and 2011 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the 3 screws and the lower steering column shroud.
  2. Disconnect the electrical connector.
  3. Using a suitable tool such as a dentist pick, pull the tangs outward and remove the Passive Anti-Theft System (PATS) transceiver.
    4. NOTE: Replacement of the PATS transceiver does not require the PATS keys to be programmed into the Instrument Panel Cluster (IPC) again.
  4. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals