LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Taurus LX, 3.0 2, AX4N >> Repair and Diagnosis >> External Pages >> Different car >> Section 1757 (Instrument Cluster Illumination And Panel Illumination) >> Removal And Installation >> Instrument Panel Dimmer Switch >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2011 Mercury Milan, 2011 Lincoln MKZ, and 2011 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the instrument panel side finish panel.
    2. NOTE: The switch bezel assembly is removed by releasing tabs and pushing out from behind.
  2. Release the tabs and remove the switch bezel assembly.
    • Disconnect the electrical connectors.
  3. Release the 2 tabs and remove the instrument panel dimmer switch from the switch bezel.
  4. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals