Fuel Tank and Filler Pipe (AWD Vehicles)
WARNING: This page is about a different car, the 2011 Mercury Milan, 2011 Lincoln MKZ, and 2011 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Exploded View Of Fuel Tank And Filler Pipe (AWD Vehicles) Components With Torque Specifications
ITEM DESCRIPTION
| Item | Part Number | Description |
|---|---|---|
| 1 | W807011 | Fuel level sensor access cover screw (3 required) |
| 2 | 54111 | Fuel level sensor access cover |
| 3 | 14A464 | Fuel Pump (FP) module electrical connector |
| 4 | 9C385 | FP module lock ring |
| 5 | 14A464 | Fuel level sensor electrical connector |
| 6 | 9275 | Fuel level sensor |
| 7 | 9002 | Fuel tank |
| 8 | - | Fuel tube-to-FP module quick connect coupling (part of 9J279) |
| 9 | 9J279 | Fuel tube |
| 10 | - | Internal crossover fuel tube-to-FP module quick connect coupling (part of 9002) |
| 11 | - | Internal crossover fuel tube (part of 9002) |
| 12 | 9H307 | FP module |
| 13 | 9276 | FP module O-ring seal |
| 14 | W807011 | FP module access cover screw (3 required) |
| 15 | 54111 | FP module access cover |
| 16 | - | Fuel vapor tube assembly-to-fuel tank quick connect coupling (part of 9A228) |
| 17 | 9A228 | Fuel vapor tube assembly |
| 18 | W525937 | Fuel tank filler pipe hose clamp |
| 19 | 9047 | Fuel tank filler pipe hose |
| 20 | W525937 | Fuel tank filler pipe hose clamp |
| 21 | - | Fuel vapor tube assembly-to-fuel tank filler pipe recirculation tube quick connect coupling (part of 9A228) |
| 22 | - | Fuel tank filler pipe recirculation tube (part of 9034) |
| 23 | N806543 | Fuel tank filler pipe bracket nut |
| 24 | W707398 | Fuel tank filler pipe bracket bolt |
| 25 | 9B178 | Fuel tank filler pipe |
| 26 | 27936 | Fuel tank filler pipe housing |
| 27 | 9K072 | Information bezel |
| 28 | - | Fuel tank filler pipe housing retainer (3 required) (part of 27936) |
- For additional information, refer to the appropriate procedures in this service information.