Check Axial End Play
WARNING: This page is about a different car, the 2005 Ford Pickup, 2005 Ford F550 Super Duty, 2005 Ford F450 Super Duty, and 2005 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
- Position the dial indicator on the turbine end of the radial shaft and zero the indicator.
- Move the radial shaft back and forth by hand and record the reading.
- If readings exceed specifications, install a new turbocharger.
NOTE:
Radial shaft movement cannot readily be measured on this turbocharger.