Motor Electronics Pump

WARNING: This page is about a different car, the 2011 Mercury Milan, 2011 Lincoln MKZ, and 2011 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Motor Electronics Pump Components

Courtesy of FORD MOTOR CO.

ITEM DESCRIPTION

Item	Part Number	Description
1	14A464	Motor Electronics Cooling System (MECS) coolant pump electrical connector
2	8A567	MECS coolant pump outlet hose
3	15179	MECS coolant pump inlet hose
4	8C419	MECS pump

Drain the Motor Electronics Cooling System (MECS). For additional information, refer to MOTOR ELECTRONICS COOLING SYSTEM DRAINING AND FILLING in this service information.
Disconnect the MECS cooling pump electrical connector.

Fig 2: Locating MECS Cooling Pump Electrical Connector
Courtesy of FORD MOTOR CO.
Compress the 2 retainers, remove the MECS pump from the bracket and pull the MECS pump down to gain access to the constant tension clamps that hold the hoses on.

Fig 3: Locating MECS Pump Bracket Retainers
Courtesy of FORD MOTOR CO.
Compress the constant tension clamps and disconnect the inlet and outlet hoses from the MECS pump.

Fig 4: Locating MECS Pump Inlet And Outlet Hoses Clamps
Courtesy of FORD MOTOR CO.
To install, reverse the removal procedure.