Removal and Installation
WARNING: This page is about a different car, the 2011 Mercury Milan, 2011 Lincoln MKZ, and 2011 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the wiper pivot arms. For additional information, refer to WIPER PIVOT ARM in this service information.
- Remove the windshield wiper mounting arm and pivot shaft. For additional information, refer to WIPER MOUNTING ARM AND PIVOT SHAFT in this service information.
- Separate the wiper motor linkage arm from the wiper mounting arm and pivot shaft assembly.
- Remove the 2 wiper motor-to-wiper mounting arm bolts and the wiper motor.
- To install, tighten to 8 Nm (71 lb-in).
- To install, reverse the removal procedure.