LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Taurus LX, 3.0 2, AX4N >> Repair and Diagnosis >> External Pages >> Different car >> Section 1704 (Rear Disc Brake System) >> Removal And Installation >> Rear Disc Brake Shield - Front Wheel Drive (FWD) >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2011 Mercury Milan, 2011 Lincoln MKZ, and 2011 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the wheel bearing and wheel hub. For additional information, refer to REAR SUSPENSION article.
  2. Remove the 3 brake disc shield bolts and the brake disc shield.
    • To install, tighten to 23 Nm (17 lb-ft).
  3. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals