LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Taurus LX, 3.0 2, AX4N >> Repair and Diagnosis >> External Pages >> Different car >> Section 17 (Engine - 4.2L V6 - VIN 2) >> Removal & Installation >> Engine >> Installation (Van)

Installation (Van)

WARNING: This page is about a different car, the 2001 Ford Pickup, 2001 Ford Econoline, 2000 Ford Pickup, and 2000 Ford Econoline. However, it is still accessible from the selected car via links, so may be relevant.
  1. To install, reverse removal procedure. Replace torque converter nuts with NEW ones. Tighten all bolts to specification. See TORQUE SPECIFICATIONS .
  2. When installing fuel lines, fit NEW fuel resistant "O" rings (Brown) on fuel lines. Lightly coat "O" rings with clean engine oil before installing. Clean fittings, and replace garter spring (if necessary).
  3. Adjust all control cables and fluid levels. Refill cooling system. Evacuate and recharge A/C system.
scientia non olet · About LEMON Manuals