LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Taurus LX, 3.0 2, AX4N >> Repair and Diagnosis >> External Pages >> Different car >> Section 17 (Engine - 4.2L V6 - VIN 2) >> Overhaul >> Cylinder Head >> Valve Springs

Valve Springs

WARNING: This page is about a different car, the 2001 Ford Pickup, 2001 Ford Econoline, 2000 Ford Pickup, and 2000 Ford Econoline. However, it is still accessible from the selected car via links, so may be relevant.
  1. Measure valve spring installed height from top of spring seat to underside of spring retainer. Ensure installed height is within specification. See VALVES & VALVE SPRINGS  table under ENGINE SPECIFICATIONS.
  2. If installed height is not within specification, a spacer can be installed between cylinder head and valve spring to obtain correct height. Inspect valve spring free length and pressure. Replace valve spring if free length and pressure are not within specification. See VALVES & VALVE SPRINGS  table.
CAUTION: DO NOT install valve spring spacers unless necessary. Using more spacers than required can result in spring breakage or worn camshaft lobes.
scientia non olet · About LEMON Manuals