Cylinder Head

WARNING: This page is about a different car, the 2001 Ford Pickup, 2001 Ford Econoline, 2000 Ford Pickup, and 2000 Ford Econoline. However, it is still accessible from the selected car via links, so may be relevant.

CYLINDER HEAD

Application

Specification

Maximum Warpage ⁽¹⁾

.003" (.08 mm)

Valve Seats

Seat Angle

44.75°

Seat Width

.06-.08" (1.5-2.0 mm)

Maximum Seat Runout

.001" (.025 mm)

Valve Guides

Intake Valve

Valve Guide Bore I.D.

.3433-.3443" (8.720-8.745 mm)

Valve Stem-To-Guide Oil Clearance

.0007-.0027" (.020-.069 mm)

Exhaust Valve

Valve Guide Bore I.D.

.3433-.3443" (8.720-8.745 mm)

Valve Stem-To-Guide Oil Clearance

.002-.004" (.045-.095 mm)

⁽¹⁾	Specification listed is within 6" (152 mm). Overall warpage is .006" (.15 mm). DO NOT machine more than .010" (.25 mm) from original gasket surface.