Network Messaged Inputs
WARNING: This page is about a different car, the 2011 Mercury Milan, 2011 Lincoln MKZ, and 2011 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
Module messaging is becoming the standard for sending and receiving information required to operate the IPC . For a complete list of module messages with the message origination sources, refer to MODULE COMMUNICATIONS NETWORK -- FUSION, MILAN & MKZ article.
The status and information messages that the IPC requires from other vehicle inputs are grouped into the following systems/subsystems:
- ABS
- Anti-lock braking
- Traction control
- Base brake system
- Brake fluid level status
- Parking brake status
- Lighting system
- LH/RH turn
- High beam
- Powertrain
- Charging system
- ETC
- High voltage battery
- Engine emission system
- Engine rpm
- Engine temperature
- Motor temperature
- Transaxle
- Vehicle speed
- SRS
- TPMS