Normal Operation
WARNING: This page is about a different car, the 2011 Mercury Milan, 2011 Lincoln MKZ, and 2011 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
The ignition switch receives fused battery voltage from Smart Junction Box (SJB) fuse 27 (20A) through circuit SBP27 (BU/RD). The ignition switch then sends voltage to various systems depending on ignition switch position. The ignition switch has 4 possible positions:
- OFF - No power on any circuits
- ACC - Power on circuit CDC33 (VT/GN)
- RUN - Power on circuit CDC34 (WH/OG)
- START - Power on circuit CDC35 (BU/WH)
This pinpoint test is intended to diagnose the following:
- Fuse
- Wiring, terminals or connectors
- Ignition switch
- SJB