LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Taurus LX, 3.0 2, AX4N >> Repair and Diagnosis >> External Pages >> Different car >> Section 167 (Supplemental Inflatable Restraint System -- F250-F550 Super Duty) >> Removal And Installation >> Driver Air Bag Module >> Installation

Driver Air Bag Module: Installation

WARNING: This page is about a different car, the 2005 Ford Pickup, 2005 Ford F550 Super Duty, 2005 Ford F450 Super Duty, and 2005 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the driver air bag module.
    1. Connect the horn electrical connector.
    2. Connect the driver air bag module electrical connector.
    3. Position the driver air bag module into the steering wheel.
    4. Install the two bolts.
    5. Install the two steering wheel back cover plugs.
      Fig 1: Installing Driver Air Bag Module - With Torque Specifications
      G03912073Courtesy of FORD MOTOR CO.
  2. Repower the system. For additional information, refer to SUPPLEMENTAL RESTRAINT SYSTEM (SRS) DEPOWERING AND REPOWERING  in this article.
scientia non olet · About LEMON Manuals