LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Taurus LX, 3.0 2, AX4N >> Repair and Diagnosis >> External Pages >> Different car >> Section 1665 (Automatic Transaxle - AISIN Aw21) >> Disassembly And Assembly Of Subassemblies >> Torque Converter Hub Seal >> Disassembly

Torque Converter Hub Seal: Disassembly

WARNING: This page is about a different car, the 2011 Lincoln MKZ and 2011 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the transaxle. For additional information, refer to TRANSAXLE  in this service information.
  2. Remove the torque converter.
    Fig 1: Locating Torque Converter
    G07786085Courtesy of FORD MOTOR CO.
  3. Using the Input Shaft Oil Seal Remover and Slide Hammer, remove the torque converter hub seal.
    Fig 2: Removing Torque Converter Hub Seal Using The Input Shaft Oil Seal Remover And Slide Hammer
    G07786086Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals