LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Taurus LX, 3.0 2, AX4N >> Repair and Diagnosis >> External Pages >> Different car >> Section 1600 (Engine Mechanical - 4.6L (2V)) >> In-Vehicle Servicing >> Crankshaft Rear Seal >> Installation

Crankshaft Rear Seal: Installation

WARNING: This page is about a different car, the 2010 Lincoln Town Car. However, it is still accessible from the selected car via links, so may be relevant.
    NOTE: Lubricate the inner lip of the crankshaft rear seal with engine oil.
  1. Using the Crankshaft Rear Oil Seal Installers, install the crankshaft rear seal.
    2. Fig 1: Using Special Tools To Install New Crankshaft Rear Seal
    G04583928Courtesy of FORD MOTOR CO.
  2. Using the Crankshaft Rear Oil Slinger Installer and Crankshaft Rear Oil Seal Installers, install the crankshaft oil slinger.
    3. Fig 2: Installing Crankshaft Rear Oil Slinger Using Special Tools
    G03920154Courtesy of FORD MOTOR CO.
  3. Install the flexplate. For additional information, refer to Flexplate .
scientia non olet · About LEMON Manuals