Digital Transmission Range (TR) Sensor: Removal

WARNING: This page is about a different car, the 2010 Lincoln Town Car. However, it is still accessible from the selected car via links, so may be relevant.

With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to JACKING & LIFTING article.
Disconnect the selector lever cable.

Fig 1: Selector Lever Cable At Transmission

Courtesy of FORD MOTOR CO.

Disconnect the digital transmission range (TR) sensor connector.

Fig 2: Transmission Range (TR) Sensor Electrical Connector

Courtesy of FORD MOTOR CO.

Remove the bolts and remove the digital TR sensor.

Fig 3: Transmission Range (TR) Sensor Bolts

Courtesy of FORD MOTOR CO.