LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Taurus LX, 3.0 2, AX4N >> Repair and Diagnosis >> External Pages >> Different car >> Section 1592 (Seat System - Seats) >> Diagnostic Tests >> Seats >> Pinpoint Tests >> Pinpoint Test W: DTC B1676 >> Normal Operation

Normal Operation

WARNING: This page is about a different car, the 2010 Lincoln Town Car. However, it is still accessible from the selected car via links, so may be relevant.

The Driver Seat Module (DSM) is supplied voltage on circuit 490 (RD) and ground on circuit 57 (BK). The DSM monitors the supply voltage and will disable the system if voltage changes outside the normal operating range.

This pinpoint test is intended to diagnose the following: