Pinpoint Test T: The Reversing Lamps Are On Continuously
WARNING: This page is about a different car, the 2010 Lincoln Town Car. However, it is still accessible from the selected car via links, so may be relevant.
- T1 CHECK THE DIGITAL TR SENSOR
- Key in OFF position.
- Disconnect: Digital TR Sensor C167
- Key in ON position.
- Do the reversing lamps continue to illuminate?
- YES : Go to T2.
- NO : INSTALL a new digital TR sensor. REFER to IN-VEHICLE SERVICING article. TEST the system for normal operation.
- T2 CHECK THE INTERIOR REAR VIEW MIRROR
- Key in OFF position.
- Disconnect: Interior Rear View Mirror C911 or C9012
- Key in ON position.
- Do the reversing lamps continue to illuminate?
- YES : Go to T3.
- NO : INSTALL a new interior rear view mirror. REFER to REAR VIEW MIRRORS article. TEST the system for normal operation.
- T3 CHECK CIRCUIT 140 (BK/PK) FOR A SHORT TO VOLTAGE
- Key in OFF position.
- Disconnect: PAM C4014
- Key in ON position.
- Do the reversing lamps continue to illuminate?
- YES : REPAIR the circuit. TEST the system for normal operation.
- NO : INSTALL a new parking aid module (PAM). REFER to PARKING AID article. TEST the system for normal operation.