Component Test
WARNING: This page is about a different car, the 2010 Mercury Mariner and 2010 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
Measure the resistance between the video camera pins, component side, as follows:
RESISTANCE REFERENCE CHART
| Video Camera Pins | Resistance |
|---|---|
| 4 and 6 | 38-49 ohms |
| 5 and 6 | 39-48 ohms |
| 4 and 5 | 74-101 ohms |
| 3 and 6 | Greater than 10,000 ohms |
If the resistance values for the video camera are within the specifications listed, the video camera is functional at this time.
If the resistance values for the video camera are not within the specifications listed, the video camera is inoperative at this time. Install a new video camera. Refer to VIDEO CAMERA .