LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Taurus LX, 3.0 2, AX4N >> Repair and Diagnosis >> External Pages >> Different car >> Section 1548 (Windows And Glass - Glass, Frames And Mechanisms) >> Removal And Installation >> Window Glass - Liftgate >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2010 Mercury Mariner and 2010 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
  1. Open the liftgate window glass.
  2. Remove the 2 liftgate window glass nut access covers.
  3. Through the RH access, disconnect the liftgate window glass electrical harness connector.
  4. Disconnect the LH heated window grid wire electrical connector.
    5. NOTE: An assistant may be needed to carry out this step.
  5. Disconnect the 2 liftgate window glass cylinders.
    1. Slide the spring retainer to the end of the socket.
    2. Disconnect the socket from the ball stud.
      Fig 1: Identifying Spring Retainer And Socket
      G06099782Courtesy of FORD MOTOR CO.
    6. NOTE: An assistant may be needed to carry out this step.
  6. Remove the 2 liftgate window glass hinge nuts and the liftgate window glass.
    • To install, tighten to 11 Nm (97 lb-in).
  7. To install, reverse the removal procedure.
    • Transfer components as necessary.
scientia non olet · About LEMON Manuals