LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Taurus LX, 3.0 2, AX4N >> Repair and Diagnosis >> External Pages >> Different car >> Section 1548 (Windows And Glass - Glass, Frames And Mechanisms) >> Removal And Installation >> Door Glass Top Run - Rear >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2010 Mercury Mariner and 2010 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the rear door window regulator. For additional information, refer to WINDOW REGULATOR - REAR DOOR .
  2. Position the rear door window glass to the full DOWN position.
  3. Remove the 2 screws and the rear door exterior sail panel.
  4. Remove the interior door glass weatherstrip.
  5. Remove the exterior door glass weatherstrip.
  6. Remove the rear door glass top run bolt.
    • To install, tighten to 6 Nm (53 lb-in).
  7. Position the rear door window glass down and forward.
  8. Remove the rear door glass top run.
  9. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals