LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Taurus LX, 3.0 2, AX4N >> Repair and Diagnosis >> External Pages >> Different car >> Section 1542 (Evaporative Emissions System - (Hybrid)) >> General Procedures >> Evaporative Emission System Leak Test >> Phase 1 - Leak Verification

Phase 1 - Leak Verification

WARNING: This page is about a different car, the 2010 Mercury Mariner and 2010 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
  1. Run the EVAP  Test with the scan tool.
    2. NOTE: Some small leaks may not be detected using the EVAP  Test. If the system has passed the test but a leak is still suspected, then proceed to PHASE 2 .
  2. If the Evaporative Emission (EVAP) system failed the EVAP  Test, then proceed to PHASE 2 .
scientia non olet · About LEMON Manuals