Side Air Bags

WARNING: This page is about a different car, the 2010 Mercury Mariner and 2010 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: If a side air bag deployment took place, a new seat back pad, trim cover and side air bag module and nuts must be installed. A new seat back frame should be installed if necessary.

The driver and passenger seat side air bags are attached to the seat backrest frame. If a seat side air bag deployment has occurred or for more information, refer to the appropriate procedure in INSPECTION AND REPAIR AFTER A SUPPLEMENTAL RESTRAINT SYSTEM (SRS) DEPLOYMENT .