Special Tool(s)

WARNING: This page is about a different car, the 2010 Mercury Mariner and 2010 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.

SPECIAL TOOL REFERENCE

Courtesy of FORD MOTOR CO.	Remover, Halfshaft Oil Seal 308-428
Courtesy of FORD MOTOR CO.	Slide Hammer 100-001 (T50T-100-A)

Remove the Power Transfer Unit (PTU). For additional information, refer to POWER TRANSFER UNIT (PTU) .
Using the Halfshaft Oil Seal Remover and Slide Hammer, remove the intermediate shaft seal.

Fig 1: Identifying Halfshaft Oil Seal Remover And Slide Hammer
Courtesy of FORD MOTOR CO.