LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Taurus LX, 3.0 2, AX4N >> Repair and Diagnosis >> External Pages >> Different car >> Section 1492 (Power Transfer Unit (PTU)) >> Installation >> Intermediate Shaft Seal >> Special Tool(s)

Special Tool(s)

WARNING: This page is about a different car, the 2010 Mercury Mariner and 2010 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
SPECIAL TOOL REFERENCE

G06095378Courtesy of FORD MOTOR CO.
 Handle
205-153 (T80T-4000-W)
G06098376Courtesy of FORD MOTOR CO.
 Installer, PTO Driven Gear Oil Seal
308-429
  1. Using the Handle and PTO Driven Gear Oil Seal Installer, install the intermediate shaft seal.
    Fig 1: Identifying Handle, PTO Driven Gear Oil Seal Installer And Intermediate Shaft Seal
    G06095387Courtesy of FORD MOTOR CO.
  2. Install the Power Transfer Unit (PTU). For additional information, refer to POWER TRANSFER UNIT (PTU) .
scientia non olet · About LEMON Manuals