Special Tool(s)
WARNING: This page is about a different car, the 2010 Mercury Mariner and 2010 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
SPECIAL TOOL SPECIFICATION
 Courtesy of FORD MOTOR CO.
|
Feeler Gauge Set
303-D027 (D81L-4201-A) or equivalent |
NOTE:
Refer to appropriate article in Engine
for the specification.
- Inspect the piston for ring land damage or accelerated wear.
Courtesy of FORD MOTOR CO.
- Using the Feeler Gauge Set, measure the piston ring-to-groove clearance.
Courtesy of FORD MOTOR CO.