LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Taurus LX, 3.0 2, AX4N >> Repair and Diagnosis >> External Pages >> Different car >> Section 1470 (Brake System - General Information) >> General Procedures >> Brake System Inspection >> Brake Booster (Non-Hybrid Vehicles)

Brake Booster (Non-Hybrid Vehicles)

WARNING: This page is about a different car, the 2010 Mercury Mariner and 2010 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
  1. Inspect the brake booster for excessive corrosion or damage. Inspect the vacuum hoses for leaks and kinks.
    • Install a new brake booster if signs of excessive corrosion or damage is found. For additional information, refer to REMOVAL AND INSTALLATION .
    • Repair or replace vacuum hoses as necessary.
    • To check for correct brake booster operation, refer to COMPONENT TESTS .
scientia non olet · About LEMON Manuals