Safety Belt Warning System
WARNING: This page is about a different car, the 2010 Mercury Milan, 2010 Lincoln MKZ, and 2010 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
The safety belt warning indicator illuminates and a chime sounds to remind the occupants to fasten their safety belts.
The conditions of operation for the safety belt warning indicator and chime are as follows:
- If the driver and/or front passenger safety belt is not buckled before the ignition switch is turned to ON, the safety belt warning indicator illuminates for 1 to 2 minutes and the warning chime sounds for 4 to 8 seconds.
- If the driver and/or front passenger safety belt is buckled while the warning indicator is illuminated and the warning chime is sounding, the safety belt warning indicator and warning chime turn off.
- If the driver and/or front passenger safety belt is buckled before the ignition switch is turned to ON, the safety belt warning indicator and warning chime remain off.