LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Taurus LX, 3.0 2, AX4N >> Repair and Diagnosis >> External Pages >> Different car >> Section 1445 (Anti-Theft System - Perimeter) >> Removal And Installation >> Anti-Theft Inhibit Switch - Luggage Compartment >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2010 Mercury Milan, 2010 Lincoln MKZ, and 2010 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the luggage compartment lid lock cylinder. For additional information, refer to REMOVAL AND INSTALLATION .
  2. Lift the retaining tabs, turn the switch clockwise and remove the luggage compartment anti-theft inhibit switch (also known as the luggage compartment lid disarm switch).
  3. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals