Main Shaft: Notes
WARNING: This page is about a different car, the 2005 Ford Pickup, 2005 Ford F550 Super Duty, 2005 Ford F450 Super Duty, and 2005 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
SPECIAL TOOLS SPECIFICATIONS
| Fixture, Gear Pack 308-381 | |
| Remover/Installer, Transmission Bearing Collet 308-132 (T87T-7025-FH) | |
| Guide, Thrust Washer 308-415 | |
| Remover/Installer, Thrust Washer Bearing Cup 308-416 | |
| Remover/Installer, Bearing Tube 308-052 (T77J-7025-B) | |
| Remover, Bearing Collet Sleeve 308-029 (T75L-7025-G) | |
| Screw, Bearing Removal Tube 308-092 (T84T-7025-B) | |
| 2 or 3 Jaw Puller 205-D027 (D80L-1013-A) | |
| Shaft Protector Set 205-DS004 (D80L-625-A) | |
| Puller, Bearing 205-D064 (D84L-1123-A) or equivalent | |
| Installer, Wheel Speed Sensor Ring 206-059 (T94P-20202-B1) | |
| Gear/Bearing Heater 164-R3900 | |
| 17.5 Ton Press 014-00021 | |
| Dial Indicator Gauge With Holding Fixture 100-002 (TOOL-4201-A) | |
| Gauge, Clutch Housing 308-021(T75L-4201-A) |