Countershaft and Bearing: Assembly

WARNING: This page is about a different car, the 2005 Ford Pickup, 2005 Ford F550 Super Duty, 2005 Ford F450 Super Duty, and 2005 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.

Remove the bearing from the Gear/Bearing Heater, then install the countershaft bearing.
- If necessary, use the Thrust Washer Bearing Race Driver to seat the bearing.
  
  Fig 1: Installing Countershaft Bearing
  Courtesy of FORD MOTOR CO.
Remove the bearing from the Gear/Bearing Heater, then install the rear countershaft bearing.
- If necessary, use the Thrust Washer Bearing Race Driver to seat the bearing.
  
  Fig 2: Installing Rear Countershaft Bearing
  Courtesy of FORD MOTOR CO.