LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Taurus LX, 3.0 2, AX4N >> Repair and Diagnosis >> External Pages >> Different car >> Section 1438 (Fuel Tank & Fuel Lines (Except Hybrid)) >> Removal And Installation >> Inertia Fuel Shutoff (IFS) Switch >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2010 Mercury Milan, 2010 Lincoln MKZ, and 2010 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the RH front door scuff plate.
  2. Disconnect the Inertia Fuel Shutoff (IFS) switch electrical connector.
  3. Remove the 2 bolts and the IFS  switch.
    • To install, tighten to 2 Nm (18 lb-in).
    NOTE: Do not overtighten the fasteners or damage to the switch will occur.
  4. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals