LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Taurus LX, 3.0 2, AX4N >> Repair and Diagnosis >> External Pages >> Different car >> Section 1427 (Anti-Theft System - Passive Anti-Theft System (Pats) (Except Hybrid)) >> Diagnosis And Testing >> Anti-Theft >> Pinpoint Tests >> Pinpoint Test A: DTC B10D5:13 >> Pinpoint Test A: DTC B10D5:13

Pinpoint Test A: DTC B10D5:13

WARNING: This page is about a different car, the 2010 Mercury Milan, 2010 Lincoln MKZ, and 2010 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
  1. A1 INSPECT THE PATS TRANSCEIVER FOR CORRECT INSTALLATION 
    NOTE: Replacement of the PATS  transceiver does not require the PATS  keys to be programmed into the Instrument Panel Cluster (IPC) again.
    • Ignition OFF.
    • Verify the PATS  transceiver is correctly installed. Refer to Removal and Installation .
    • Ignition ON.
    • Clear the IPC  DTCs.
    • Ignition OFF.
    • Ignition ON.
    • Retrieve the IPC  DTCs.
    • Is DTC B10D5:13 retrieved? 
      • Yes:  INSTALL a new PATS  transceiver. REFER to Removal and Installation . CLEAR the DTCs. CYCLE the ignition. REPEAT the self-test.
      • No:  The system is OK.
scientia non olet · About LEMON Manuals