Inspection and Verification
WARNING: This page is about a different car, the 2010 Mercury Milan, 2010 Lincoln MKZ, and 2010 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
- Verify the customer concern by operating the system.
- Visually inspect for obvious signs of mechanical or electrical damage.
- If an obvious cause for an observed or reported concern is found, correct the cause before proceeding to the next step.
- If the concern is not visually evident, verify the symptom. Go to SYMPTOM TABLE - EXTERNAL CONTROLS or go to SYMPTOM TABLE - NVH .
VISUAL INSPECTION TABLE
| Mechanical | Electrical |
|---|---|
|
|
DIAGNOSTIC TROUBLE CODE TABLE
| DTC | Component | Description | Condition | Symptom | Action |
|---|---|---|---|---|---|
| B2572 | Brake Shift Interlock | Brake Shift Interlock Output Circuit Failure | The associated circuitry connected to the Smart Junction Box (SJB) or fuse, or the SJB itself may have an issue causing a brake shift interlock concern. | Brake shift interlock is inoperative or does not operate correctly. | Go to PINPOINT TEST A . |
| P0815 | Select Shift Switch | Select Shift Switch Output Circuit Failure | The associated circuitry connected to the select shift switch or fuse, or the select shift switch itself may have an issue causing a select shift + fault. | Select shift operation is inoperative or does not operate correctly. | Go to PINPOINT TEST B . |
| P0816 | Select Shift Switch | Select Shift Switch Output Circuit Failure | The associated circuitry connected to the select shift switch or fuse, or the select shift switch itself may have an issue causing a select shift - fault. | Select shift operation is inoperative or does not operate correctly. | Go to PINPOINT TEST B . |