LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Taurus LX, 3.0 2, AX4N >> Repair and Diagnosis >> External Pages >> Different car >> Section 140 (Automatic Transmission -- F250-F550 Super Duty) >> In-Vehicle Repair >> Transmission Insulator And Retainer >> Removal

Transmission Insulator And Retainer: Removal

WARNING: This page is about a different car, the 2005 Ford Pickup, 2005 Ford F550 Super Duty, 2005 Ford F450 Super Duty, and 2005 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. With the vehicle in NEUTRAL, position on a hoist. For additional information, refer to JACKING AND LIFTING .
  2. Remove the rear transmission support insulator.
    1. Remove the rear transmission support insulator nuts.
    2. Remove the rear transmission support insulator bolts.
      Fig 1: Removing Rear Transmission Support Insulator
      G03889192Courtesy of FORD MOTOR CO.
  3. Using a suitable high-lift transmission jack, remove the rear transmission support insulator.
    1. Raise the transmission upward, off the transmission support insulator.
    2. Remove the rear transmission support insulator.
      Fig 2: Identifying Rear Transmission Mount
      G03889101Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals