LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Taurus LX, 3.0 2, AX4N >> Repair and Diagnosis >> External Pages >> Different car >> Section 140 (Automatic Transmission -- F250-F550 Super Duty) >> In-Vehicle Repair >> Transmission Insulator And Retainer >> Installation

Transmission Insulator And Retainer: Installation

WARNING: This page is about a different car, the 2005 Ford Pickup, 2005 Ford F550 Super Duty, 2005 Ford F450 Super Duty, and 2005 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the rear transmission support insulator.
    1. Install the rear transmission support insulator.
    2. Lower the transmission onto the transmission support insulator.
      Fig 1: Identifying Rear Transmission Mount
      G03889113Courtesy of FORD MOTOR CO.
    2. NOTE: It may be necessary to raise the back of the transmission slightly in order to install the bolts.
    Fig 2: Identifying Transmission Support Insulator Bolts
    G03889100Courtesy of FORD MOTOR CO.
  2. Loosely install the transmission support insulator bolts.
  3. Loosely install the transmission support insulator nuts.
    Fig 3: Identifying Transmission Support Insulator Nuts
    G03889099Courtesy of FORD MOTOR CO.
  4. Tighten the transmission support insulator bolts and nuts.
    Fig 4: Transmission Insulator Bolts And Nuts - With Torque Specification
    G03889114Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals