LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Taurus LX, 3.0 2, AX4N >> Repair and Diagnosis >> External Pages >> Different car >> Section 140 (Automatic Transmission -- F250-F550 Super Duty) >> In-Vehicle Repair >> Output Shaft Speed (OSS) Sensor >> Installation

Output Shaft Speed (OSS) Sensor: Installation

WARNING: This page is about a different car, the 2005 Ford Pickup, 2005 Ford F550 Super Duty, 2005 Ford F450 Super Duty, and 2005 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.

    4x4 vehicles 

  1. Install the output shaft speed (OSS) sensor.
    1. Lubricate the O-ring and install the output shaft speed (OSS) sensor.
    2. Install the bolt.
      Fig 1: Installing Output Shaft Speed (OSS) Sensor (4x4)
      G03908877Courtesy of FORD MOTOR CO.

    2. 4x2 vehicles 

  2. Install the output shaft speed (OSS) sensor.
    1. Lubricate the O-ring and install the output shaft speed (OSS) sensor.
    2. Install the bolt.
      Fig 2: Installing Output Shaft Speed (OSS) Sensor (4x2)
      G03889076Courtesy of FORD MOTOR CO.

    3. All vehicles 

  3. Connect the output shaft speed (OSS) sensor electrical connector.
    Fig 3: Identifying Output Shaft Speed (OSS) Sensor Electrical Connector
    G03889074Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals