LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Taurus LX, 3.0 2, AX4N >> Repair and Diagnosis >> External Pages >> Different car >> Section 140 (Automatic Transmission -- F250-F550 Super Duty) >> In-Vehicle Repair >> Extension Housing Gasket - 4X4 >> Removal

Extension Housing Gasket - 4X4: Removal

WARNING: This page is about a different car, the 2005 Ford Pickup, 2005 Ford F550 Super Duty, 2005 Ford F450 Super Duty, and 2005 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the transfer case. For additional information, refer to TRANSFER CASE .
  2. Using the special tool, remove and discard the output shaft nut.
    Fig 1: Removing Output Shaft Nut Using Special Tool
    G03889090Courtesy of FORD MOTOR CO.
  3. Disconnect the output shaft speed (OSS) sensor electrical connector.
    Fig 2: Identifying Output Shaft Speed (OSS) Sensor Electrical Connector
    G03889074Courtesy of FORD MOTOR CO.
  4. Remove the bolts and the transmission extension housing.
    Fig 3: Identifying Extension Housing Bolts
    G03889104Courtesy of FORD MOTOR CO.
  5. Remove and discard the extension housing gasket.
    Fig 4: Identifying Extension Housing Gasket
    G03889106Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals