Disassembly and Assembly

WARNING: This page is about a different car, the 2005 Ford Pickup, 2005 Ford F550 Super Duty, 2005 Ford F450 Super Duty, and 2005 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Mark the connecting rod and piston to make sure correct orientation on reassembly.

Fig 1: Removing Piston Pin Retainers

Courtesy of FORD MOTOR CO.

Remove the piston pin retainers.

NOTE: The piston pins are a floating type piston pin and should not require a press to remove or install them.

Remove the connecting rod.
1. Remove the piston pin.
2. Remove the connecting rod.
  
  Fig 2: Removing Connecting Rod
  Courtesy of FORD MOTOR CO.
To assemble, reverse the disassembly procedure.