LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Taurus LX, 3.0 2, AX4N >> Repair and Diagnosis >> External Pages >> Different car >> Section 1378 (Information Center - Instrumentation, Message Center And Warning Chimes) >> General Procedures >> Belt-Minder® Deactivating/Activating >> Preparation

Belt-Minder® Deactivating/Activating: Preparation

WARNING: This page is about a different car, the 2010 Mercury Milan, 2010 Lincoln MKZ, and 2010 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: The driver and front passenger Belt-Minder® are deactivated/activated independently. When deactivating/activating one seating position, do not buckle the other position as this terminates the process.
  1. Before deactivating/activating the Belt-Minder®, set the parking brake.
  2. On automatic transaxles, place the selector lever in PARK (P).
  3. On manual transaxles, place the shifter in NEUTRAL (N).
  4. Place the ignition in the OFF mode.
  5. Unbuckle the driver and front passenger safety belts.
scientia non olet · About LEMON Manuals