Setup Displays (SETUP button)
WARNING: This page is about a different car, the 2010 Mercury Milan, 2010 Lincoln MKZ, and 2010 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
The setup displays are timed modes and terminate after a finite interval. To enter the setup menu, press the SETUP button once then repeatedly press the SETUP button to scroll through and select an item in the setup menu. The message center highlights the selected item in the LH side of the setup menu.
With the desired item highlighted, press the RESET button to select the item and move to the RH side of the setup menu. A check mark is displayed next to the current selection.
The setup displays are as follows:
- Display settings
- Vehicle settings
- System check
- Demo
- Tutorials
- Resets