Removal and Installation
WARNING: This page is about a different car, the 2010 Mercury Milan, 2010 Lincoln MKZ, and 2010 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
- For Hybrid vehicles, remove the headlamp assembly. For additional information, refer to Removal and Installation .
- For non-Hybrid vehicles, remove the air cleaner. For additional information, refer to REMOVAL AND INSTALLATION or REMOVAL AND INSTALLATION .
- For non-Hybrid vehicles, disconnect the parking/turn lamp electrical connector.
- Remove the front parking lamp socket from the headlamp assembly.
- Remove the front parking lamp bulb.
- To install, reverse the removal procedure.