LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Taurus LX, 3.0 2, AX4N >> Repair and Diagnosis >> External Pages >> Different car >> Section 1371 (Supplemental Restraint System) >> Diagnosis And Testing >> Air Bag and Safety Belt Pretensioner Supplemental Restraint System (SRS) >> Principles of Operation >> Passenger Air Bag Deactivation (PAD) Indicator

Passenger Air Bag Deactivation (PAD) Indicator

WARNING: This page is about a different car, the 2010 Mercury Milan, 2010 Lincoln MKZ, and 2010 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.

The RCM  controls the state of the Passenger Air Bag Deactivation (PAD) indicator, based on information provided by the OCS  system. The PAD  indicator is lit to indicate the front passenger air bag module is disabled. An exception to this is when the front passenger seat is determined to be empty, and therefore indication of a deactivated passenger air bag module is not necessary. In all cases, the PAD  indicator is off when the passenger air bag module is enabled.

The RCM  briefly activates the PAD  indicator to prove-out the indicator function and verify to the front occupants correct functional operation of the PAD  indicator.

The following table indicates the passenger air bag status and the PAD  indicator status based on the size of the front passenger occupant.

Passenger Air Bag and PAD Indicator Status 

INDICATOR STATUS REFERENCE CHART

Occupant Size Passenger Safety Belt Buckle Status Pass. Air Bag Status PAD  Ind. Status
Empty Unbuckled Disabled Unlit
Empty Buckled Disabled Lit
Infant or Small Child Buckled/Unbuckled Disabled Lit
Adult Sized Buckled/Unbuckled Enabled Unlit