Power Steering Pump to Steering Gear Pressure Line - 3.5L Front Wheel Drive (FWD): Material
WARNING: This page is about a different car, the 2010 Mercury Milan, 2010 Lincoln MKZ, and 2010 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
MATERIAL SPECIFICATIONS TABLE
| Item | Specification |
|---|---|
| MERCON® V Automatic Transmission Fluid XT-5-QM (or XT-5-QMC) (US); CXT-5-LM12 (Canada) | MERCON® V |
Fig 1: Power Steering Pump To Steering Gear Pressure Line Replacement Components With Torque Specifications - 3.5L (FWD)
ITEM DESCRIPTION TABLE
| Item | Part Number | Description |
|---|---|---|
| 1 | W506413 | Pressure line bracket-to-engine bolt |
| 2 | W703836 | Pressure line bracket-to-RH valve cover stud nut |
| 3 | - | Power steering pressure line (part of 3A719 service kit) |
| 4 | - | Pressure line-to-power steering pump banjo bolt (part of 3A719 service kit) |
| 5 | - | Power steering pressure line seals (part of 3A719 service kit) |
| 6 | - | Pressure line-to-steering gear banjo bolt (part of 3A719 service kit) |
| 7 | W712115 | Pressure line bracket-to-steering gear bolt |
| 8 | - | Power steering pressure line seals (part of 3A719 service kit) |