Crankshaft Rear Seal with Retainer Plate: Notes
WARNING: This page is about a different car, the 2005 Ford Pickup, 2005 Ford F550 Super Duty, 2005 Ford F450 Super Duty, and 2005 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
SPECIAL TOOLS
| Installer, Crankshaft Rear Seal 303--518 (T95P-6701-DH) | |
| Remover, Crankshaft Rear Seal 303--519 (T95P-6701-EH) | |
| Installer, Crankshaft Rear Seal 303--516 (T95P-6701-BH) | |
| Remover, Crankshaft Rear Oil Slinger 303--514 (T95P-6701-AH) |
|
| Installer, Crankshaft Rear Oil Slinger 303--517 (T95P-6701-CH) |
|
| Impact Slide Hammer 100-001 (T50T-100-A) |
MATERIAL
| Item | Specification |
|---|---|
| Metal Surface Prep ZC-31 | - |
| Silicone Gasket Remover ZC-30 | - |
| Silicone Gasket and Sealant TA-30 or equivalent | WSE-M4G323-A4 |
| SAE 5W-20 Premium Synthetic Blend Motor Oil XO-5W20-QSP or equivalent | WSS-M2C930-A |