Material Specifications Table

WARNING: This page is about a different car, the 2010 Mercury Milan and 2010 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.

MATERIAL SPECIFICATIONS TABLE

Item

Specification

Fill Capacity

Motorcraft® Metal Surface Prep ZC-31-A

Motorcraft® Premium Gold Engine Coolant with Bittering Agent (bittered in US only) VC-7-B (US); CVC-7-A (Canada); or equivalent (yellow color)

WSS-M97B51-A1

⁽¹⁾

Motorcraft® SAE 5W-20 Premium Synthetic Blend Motor Oil XO-5W20-QSP (US); Motorcraft® SAE 5W-20 Super Premium Motor Oil CXO-5W20-LSP12 (Canada); or equivalent

WSS-M2C930-A

5.0L (5.3 qt) includes filter change

Motorcraft® Specialty Green Engine Coolant
VC-10-A (US); CVC-10-A (Canada)

WSS-M97B55-A

⁽¹⁾

Multi-Purpose Grease XG-4 and/or XL-5

ESB-M1C93-B

Silicone Brake Caliper Grease and Dielectric Compound XG-3-A

ESE-M1C171-A

Silicone Gasket and Sealant TA-30

WSE-M4G323-A4

Silicone Gasket Remover ZC-30

Thread Sealant with PTFE TA-24

WSK-M2G350-A2

⁽¹⁾

Early build vehicle (built before July 6, 2009) cooling systems are filled with Motorcraft® Premium Gold Engine Coolant. Late build vehicle (built on or after July 6, 2009) cooling systems are filled with Motorcraft® Specialty Green Engine Coolant. Mixing coolant types degrades the corrosion protection of the coolant. Do not mix coolant types. Failure to follow these instructions may result in engine or cooling system damage.