LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Taurus LX, 3.0 2, AX4N >> Repair and Diagnosis >> External Pages >> Different car >> Section 1344 (Engine Mechanical - 3.5L) >> Installation >> Valve Spring, Retainer and Seal >> Material

Valve Spring, Retainer and Seal: Material

WARNING: This page is about a different car, the 2010 Lincoln MKZ and 2010 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
ITEM SPECIFICATION TABLE

Item Specification
Motorcraft® SAE 5W-20 Premium Synthetic Blend Motor Oil XO-5W20-QSP (US); Motorcraft® SAE 5W-20 Super Premium Motor Oil CXO-5W20-LSP12 (Canada); or equivalent WSS-M2C930-A
  1. Using the Valve Stem Oil Seal Installer, install a new valve stem seal.
    NOTE: Lubricate the valve stem seal with clean engine oil prior to installation.
    Fig 1: Identifying Valve Stem Oil Seal Installer
    G06062541Courtesy of FORD MOTOR CO.
  2. Using the Valve Spring Compressors, install the valve spring, retainer and key.
    Fig 2: Identifying Valve Springs Compressors
    G06062293Courtesy of FORD MOTOR CO.
  3. Install the valve tappets. For additional information, refer to Removal and Installation .
scientia non olet · About LEMON Manuals